CHINZY / Delivery and integration
Commercial floor scrubber robots: site trial and acceptance
Before buying a robotic floor scrubber for a mall, exhibition hall or campus, trial one actual route. Compare stain removal, missed areas, water service time and manual touch-up on the same floor before deciding how many units or shifts you need.
Published by CHINZY · Updated
For property operators, cleaning supervisors and buyers evaluating routine scrubbing on accessible hard floors. Carpet cleaning, stairs, hazardous spills and disinfection are outside this trial.
Give each supplier the same test route
Mark the cleaning and exclusion zones, narrow passages, thresholds, movable displays, charging point and water supply and drain. Select inspection points by floor material and soil type. Agree with the site operator on traffic windows, wet-floor warnings and who takes over.
Compare manual and robotic cleaning under matched conditions
Use adjacent test areas with the same floor material and comparable soil samples approved by the site. Clean one by the normal manual process and the other by robot; swap areas in the next round. Record start and finish times, before-and-after photos, remaining marks and locations needing a second pass. Do not test the second method on an already clean floor.
- Effective coverage: unique area meeting the agreed cleaning quality divided by planned cleaning area. Count repeat passes once and keep unfinished zones in the denominator.
- Effective shift rate: accepted area divided by total elapsed hours. Include traffic delays, refill, drainage and rework. Separately record manual touch-up minutes and consumables.
How to interpret the C5 catalog figures
The CHINZY catalog lists the C5 as a candidate for commercial scrubbing. Its 550 mm scrubbing width is a cleaning width, not evidence that the whole machine fits through a doorway. Its catalog maximum of 1,980 m²/h is not a staffing or scheduling figure. Verify body dimensions, turning space and the measured effective shift rate separately.
Specify servicing and manual fallback in the quote
Itemize the robot, route setup, training, brushes and squeegees, maintenance and spares. Ask whether water stations, plumbing, lift or door interfaces and multi-floor dispatch cost extra. Until automatic water service is verified, cost the manual refill and drainage process and plan backup cleaning when the unit is unavailable.
Questions before you start
How many machines should a property budget for?
Calculate planned area per shift using the agreed frequency for each zone. Divide by the accepted area one unit actually cleans per shift on site. Round up for an initial schedule, then check overlapping windows, floor transfers and downtime cover.
How should we accept edges, wet floors and temporary obstacles?
Identify edges needing manual work before testing and inspect both methods at the same checkpoints. Have the site lead approve a controlled obstacle test and log pauses, rerouting and handoffs. Use the operator’s procedure to reopen the floor after cleaning.
Test the proposed scope
Use a controlled zone with a fixed surface, starting soil and cleaning criterion. Log machine operation, refilling and manual rework separately. Preserve the area definition and site photos.
Commercial cleaning robot trials ↗ROS 2 packages and dependencies
Inspect costmaps, planning and sensor data paths. Dependency declarations help scope software preparation; missed areas, refills and manual rework still need a site trial.
Compare two package manifests ↗Project consultation
Turn a task into a clear project brief.
Start with a remote requirements review. Site visits, embedded engineering, equipment demonstrations, training and support depend on location, staffing and resources and must be confirmed in the written scope.
Your next conversation
Send project inquiry ↗Describe one task first. We can discuss scope, materials and the appropriate next step.